Metric Nuts manufacturers & suppliers in india, Metric Hex Nuts, Metric Square Nuts DIN557

ISO 9001 : 2008 Certified Manufacturer & Suppliers Of hex nuts metric size M6-30,Metric Square Nuts DIN557,Gr2/Gr5 DIN1587 Titanium Hexagon Metric Cap Nuts,metric hex flange stop lock nut, ansi b18.2.4.4m metric hex flange nuts, a2 metric nylon insert self locking nut,Metric Thread M8 Brass Hex Nuts,metric lock hex nut M10,metric flange nuts,Din934 Metric Hexagon Weld Nuts

One of the India’s leading manufacturer of Hastelloy C22 Metric Nuts, Hastelloy C276 Metric Nuts, Incoloy 925 Metric Nuts, Incoloy 825 Metric Nuts, Inconel 625 Metric Nuts,Inconel 601 Metric Nuts, Inconel 602 Metric Nuts, Inconel 603 Metric Nuts,Incoloy 800 Metric Nuts, Incoloy 800H Metric Nuts, Inconel 600 Metric Nuts,Monel K-500 Metric Nuts, Monel 400 Metric Nuts, Duplex 2205 Metric Nuts.Compare Metric Nuts Price in china & india

Contents

TorqBolt is one of the oldest manufacturer,distributors, stockists & suppliers of Metric nuts, available in a variety or grades, materials, and finishes.Throughout history, people have been trying to limit the number of measurement systems. Today, only two systems, inch-pound and metric, are predominate in most industrial nations. As with any system, the metric system has also been changing and several modifications have been devised to match the progress of technology.

 Original Photograph Of Metric Nuts At Our Factory

 Original Photograph Of Metric Nuts At Our Factory

Metric Nuts Specification

Material
Standards
Grades

Nickel Alloy Metric Nuts

ASTM / ASME SB 160 / 164 / 425 / 166 / 446 / 574 / 472
UNS 2200 (NICKEL 200) / UNS 2201 (NICKEL 201), UNS 4400 (MONEL 400), UNS 8825 (INCONEL 825), UNS 6600 (INCONEL 600) / UNS 6601 (INCONEL 601), UNS 6625 (INCONEL 625), UNS 10276 (HASTELLOY C 276), UNS 8020 (ALLOY 20 / 20 CB 3)
Stainless Steel Metric Nuts
ASTM / ASME A/SA 193 / 194
B 8 (304), B 8C (SS 347), B 8M (SS 316), B 8 T (SS 321), A 2, A 4
Alloy Steel Metric Nuts
ASTM / ASME A/SA 193 / 194 GR
B 6, B 7/ B 7M, B 16, 2, 2HM, 2H, GR 6, B 7, B 7M
Duplex Steel Metric Nuts
UNS NO. S 31803, S 32205
Range: M10 TO M100, LENGTH UPTO 5 METERS
Nonmetallic Materials: 
Acrylic, Kel-F, Lexan, Polypropylene, Poly Vinyl Chloride, Teflon, Zytel 31, 101, 105
High-Temp Alloys
Discaloy, 19-9 DL, 16-25-6, A286, Titanium, Nimonic 80, Mulitmet, Haynes 25, Greek Ascalloy, Unitemp 252, Udimet 500, Rene 41, Inco 700, Inco 901, Hastelloy X, 235, Waspaloy, RA 330
Copper Base Alloys
Copper, Brasses: Yellow, Free-cut, Red, Naval, Bronze: Commercial, Phosphor, Silicon A & B, Aluminum, Silicon-Aluminum, Manganese, Ampco Alloys, Munitz Metal, Cupro-Nicles
Aluminum Alloys:
1100, 2011, 2014, 2017, 2024, 3003, 5052, 6053, 6061, 7075
Trademarks:
Carpenter, Armco, INCO, Cabot, DuPont.
Finish:
Black Oxide, Zinc Plating, Hot Dip Galvanized

ASTM Specifications for Metric Nuts Fasteners

A194 -  Standard Specification for Carbon and Alloy Steel Nuts for Bolts for High Pressure or High Temperature Service
A563 Standard Specification for Wrought Cobalt-20 Nickel-20 Chromium-3.5Molybdenum-3.5Tungsten-5Iron Alloy for Surgical Implant Applications
A594 Standard Specification for Stainless Steel Nuts , Corrosive service applications
F467 - Standard Specification for Nonferrous Nuts for General Use , general use

The Metric System

One problem with standardizing the metric system is the initiative to fully convert metric specifications to an ISO standard. Although the process has begun, most industries are unenthusiastic about converting from DIN or metric ANSI.

Product Type
Metric Specification
Scope
Din
ISO
ANSI/ASME
HCS
931
4014
B18.2.3.1M
Partially Threaded
933
4017
Fully Threaded
960
8676
Partially Threaded (Fine)
961
8765
Partially Threaded (Fine)
Hex Nuts
934
4032
B18.2.4.1M (style 1)
Classes 6, 8, & 10
SHCS
912
4762
B18.3.1
 

BHSHCS
N/A
7380
B18.3.4M
 

FHSCS
N/A
7991
B18.3.5
 

 

Types of Nuts And Bolts

Hex Nuts
Lock Nuts
Jam Nuts
Heavy Hex Nuts
Acorn Nuts
Flange Nuts
Slotted Nuts
Weld Nuts
Coupling Nuts
Wing Nuts
Square Nuts
Castle Nuts
Allenuts
Spring Nuts
Cage Nuts
High Nuts
Acme Nuts
Cap Nuts
Coil Nuts
Security Nuts
Handle Nuts
Hurricane Nuts
Hex Machine Screw Nuts
Self Clinching Nuts
Metric Nuts
Forged Eye Nut
Rivet Nuts
Two-way reversible lock nuts

Available Metric Nuts Sizes

  • 3831 Pieces Asst. Bolts Nuts and Washers M4 to M12
  • M10-1.5 DIN 934 Zinc Finish Steel Class 8 Hex Nut
  • M12-1.75 DIN 934 Zinc Finish Steel Class 8 Hex Nut
  • M10-1.5 DIN 985 Class 8 Zinc Finish Steel Nylon Insert Lock Nut
  • M6-1.0 DIN 985 Class 8 Zinc Finish Steel Nylon Insert Lock Nut
  • M5-0.8 DIN 934 Zinc Finish Steel Class 8 Hex Nut
  • M8-1.25 DIN 985 Class 8 Zinc Finish Steel Nylon Insert Lock Nut
  • M12-1.75 DIN 985 Class 8 Zinc Finish Steel Nylon Insert Lock Nut
  • M4-0.7 DIN 934 Zinc Finish Steel Class 8 Hex Nut
  • M8-1.25 DIN 934 A2 Stainless Steel Hex Nut
  • M6-1.0 DIN 934 Finish Stainless Steel A2 Hex Nut
  • M10-1.5 DIN 934 A2 Stainless Steel Hex Nut
  • M6-1.0 DIN 985 Grade A2 Stainless Steel Nylon Insert Lock Nut
  • M20-2.5 DIN 934 Zinc Finish Steel Class 8 Hex Nut
  • M16-2.0 DIN 985 Class 8 Zinc Finish Steel Nylon Insert Lock Nut
  • M8-1.25 DIN 985 Grade A2 Stainless Steel Nylon Insert Lock Nut
  • M10-1.5 DIN 934 Zinc Finish Steel Class 8 Hex Nut
  • M12-1.75 DIN 934 Zinc Finish Steel Class 8 Hex Nut
  • M8-1.25 DIN 934 Zinc Finish Steel Class 8 Hex Nut
  • M14-2.0 DIN 934 Zinc Finish Steel Class 8 Hex Nut

 

Metric Nuts Latest Price

We Stock All Different Types Of Nuts

 

 

Metric Nuts Dimensions

Metric Nuts Dimensions

Metric Hex Nuts
ISO 4032
Nominal Size
Thread 
Pitch
F
G
H
Width Across Flats
(Wrench Size)
Width 
Across 
Corners
Thickness
Max
Min
Min
Max
Min
M1.6
0.35
3.2
3.02
3.41
1.3
1.05
M2
0.4
4
3.82
4.32
1.6
1.35
M2.5
0.45
5
4.82
5.45
2
1.75
M3
0.5
5.5
5.32
6.01
2.4
2.15
M4
0.7
7
6.78
7.66
3.2
2.9
M5
0.8
8
7.78
8.79
4.7
4.4
M6
1
10
9.78
11.05
5.2
4.9
M8
1.25
13
12.73
14.38
6.8
6.44
M10
1.5
16
15.73
17.77
8.4
8.04
M12
1.75
18
17.73
20.03
10.8
10.37
M14
2
21
20.67
23.35
12.8
12.1
M16
2
24
23.67
26.75
14.8
14.1
M20
2.5
30
29.16
32.95
18
16.9
M24
3
36
35
39.55
21.5
20.2
M30
3.5
46
45
50.85
25.6
24.3
M36
4
55
53.8
60.78
31
29.4
M42
4.5
65
63.1
71.3
34
32.4
M48
5
75
73.1
82.6
38
36.4
M56
5.5
85
82.8
93.56
45
43.4
M64
6
95
92.8
104.86
51
49.1

 

 

Metric Nuts Material & Grade

Stainless Steel Metric Nuts
Carbon Steel Metric Nuts
Alloy Steel Metric Nuts
Alloy 20 Metric Nuts
Inconel Metric Nuts
Monel Metric Nuts
Hastelloy Metric Nuts
Incoloy Metric Nuts
Nickel Alloy Metric Nuts
Duplex Stainless Steel Metric Nuts
Super Duplex Stainless Steel Metric Nuts
Titanium Metric Nuts

Our Sales Network

To buy Metric Nuts At best price & urgent delivery please mail to order@torqbolt.com , As we have Our Dealer, distributors & direct sales representatives in below countries who will help you to buy Metric Nuts & will resolve your queries

Cities We Deliver To

Mumbai, Bengaluru, Chennai, New Delhi, Pimpri-Chinchwads, Houston, Dubai, Seoul, Hyderabad, Singapore, Abu Dhabi, Pune, Kolkata, Gurgaon, Navi Mumbai, Ahmedabad, Tehran, Calgary, Noida, Riyadh, Vadodara, London, Coimbatore, Jakarta, Istanbul, Bangkok, Kuwait City, Thane, Sharjah, Muscat, Edmonton, Busan, Mexico City, Doha, Jeddah, Aberdeen, Cairo, Geoje-si, Perth, Santiago, Chandigarh, Indore, Kuala Lumpur, Rio de Janeiro, Dammam, Melbourne, Madrid, Surat, Bhopal, Ulsan, Faridabad, La Victoria, Bogota, Lahore, Los Angeles, Algiers, Chiyoda, Ankara, Ho Chi Minh City, Toronto, Hong Kong, Rajkot, Brisbane, Petaling Jaya, Ernakulam, Secunderabad, Gimhae-si, Al Jubail, Port-of-Spain, Thiruvananthapuram, Milan, Atyrau, Lagos, Hanoi, Howrah, Sydney, Ahvaz, Karachi, New York, Caracas, Vung Tau, Al Khobar, Manama, Montreal, Granada, Courbevoie, Visakhapatnam, Ludhiana, Moscow, Dallas, Haryana, Colombo

Countries We Deliver To

India, United States, United Arab Emirates, Canada, Pakistan, Peru, Chile, Spain, France, United Kingdom, Indonesia, Israel, Iran, Kuwait, Mexico, Malaysia, Nigeria, Serbia, Singapore, Taiwan, Chile, Venezuela, Ecuador, Saudi Arabia, Netherlands, Brazil, Colombia, Ghana, Denmark, Poland, Australia, Afghanistan, Bahrain, Costa Rica, Egypt, Iraq, Jordan, South Korea, Kazakhstan, Sri Lanka, Lithuania, Norway, Oman, Philippines, Poland, Qatar, Russia, Vietnam, South Africa, Nigeria, Mexico, Turkey, Hungary, Algeria, Angola, Argentina, Austria, Azerbaijan, Bangladesh, Belarus, Belgium, Bhutan, Bolivia, Bulgaria, Croatia, Czech Republic, Estonia, Finland, Greece, Italy, Japan, Libya, Romania, Thailand, Trinidad & Tobago,Tunisia, Ukraine, Yemen, Hong Kong, Gabon, China, Portugal, Switzerland, New Zealand, Sweden, Slovakia, Kenya, Lebanon, Morocco, Mongolia

Metric Nuts Surface Treatments

Hot Dipped Galvanizing Fasteners
Phosphate Fasteners
Teflon Fasteners

Hot Dipped Galvanizing Fasteners

Phosphate Fasteners

Teflon Fasteners

Xylon Fasteners
Zinc Fasteners
Cadmium Fasteners

Xylon Fasteners

Zinc Fasteners

Cadmium Fasteners

 

Metric Nuts Useful Information

Although the various standards may have different dimensional properties, products made to these three standards are interchangeable. Hex cap screws manufactured to the dimensional specifications of any one of the listed standards are compatible with nuts manufactured to the metric specification of any of the respective organizations. The main difference between each of the hex cap screw standards is the width across the flats dimensions for the M10, M12, and M14.

Each metric standard is product specific. For example DIN 931 is for partially threaded coarse thread metric hex cap screws. DIN 960 is the specification for partially threaded fine thread metric hex cap screws. The specification used to produce the corresponding inch series fastener is ANSI B 18.2.1. However, the ANSI B 18.2.1 specification encompasses eight product types under the broad heading of "Square and Hex Bolts and Screws." Therefore, one must state the pattern of the desired product; in this case, hex cap screw. Under the metric system, each of the eight product types would have its own individual standard.

Metric Thread

The metric screw thread is identified by the capital letter M, followed by the nominal diameter. Metric threads are measured by the distance between two adjacent threads in millimeters (pitch). Threads on a standard (inch based) fastener are measured by counting the number of threads per inch.

Metric Thread

The tolerance system for metric threads is composed of a two sets of a number followed by a letter. The first set indicates the pitch diameter tolerance, and the second set indicates the major diameter tolerance. Numbers indicate the range of tolerance or tolerance grade. Capital letters indicate internal thread (nut) tolerance. Lowercase letters indicate external thread (bolt) tolerance. It is customer to not repeat the set if the second set repeats the first set. For example, 6g6g would just be 6g.

The 6g thread tolerance is comparable to a 2A Unified thread tolerance. The 6g tolerance allows room for plating. The 6h tolerance is comparable with the 3A Unified thread tolerance. The 6H tolerance is comparable to a 2B Unified thread tolerance. Like the inch series, internal threads with allowance are not standard practice. The illustration below shows the tolerance of the metric screw threads.

Example of Metric Description

Metric Description
  • Din 931; indicates partially threaded hex head cap screw &emdash; The DIN 931 standard will specify the thread tolerance.
  • M16; diameter in mm (16 mm)
  • In the metric system, all fasteners are assumed coarse thread unless another thread pitch is stated.
  • Length listed in mm (140 mm)
  • Property Class must be stated

Metric Stainless Steel Fasteners

Steel Composition Alloy Group Property Class
  # Steel Type # Minimum Tensile Strength in MPa1
A Austenitic 1 18-82 50 500 (soft)
2 18/83 70 700 (cold-worked)
3 316 80 800 (high strength)
F Ferritic 1 430 45 450 (soft)
60 600 (cold-worked)
C Martensitic 1 410 50 500 (soft)
4 416,416Se 70 700 (hardened and tempered)
    1104 1100 (hardened and tempered)
3 431 80 800 (hardened and tempered)
    1205 1200 (hardened and tempered)
P6 Precipitation-Hardening 1 630 (17/4) 90 900
  • If it is a stainless nut, then this number will indicate the Nut Proof Stress rather than the Minimum Tensile Strength.
  • Specifics vary based on specification used. ISO alloy group 1 for austenitic indicates 18-8 with sulfur added for machining. ASTM alloy group 1 austenitic may indicate 304, 304L, 305, 384, or XM7. At customer request, 303, 303Se, or XM1 may be used.
  • Specifics vary based on specification used. ISO alloy group 2 for austenitic indicates 18-8. ASTM alloy group 2 austenitic will consist of 321 or 347.
  • C1-110 & C4-110 apply to ASTM metric only.
  • C3-120 applies to ASTM metric only.
  • Precipitation-Hardening stainless steel applies to ASTM metric only.

Nut Compatibility Chart

Grade of Bolt
Finish
Nominal Size
A563 Grade and ANSI Nut Style
Recommended
Suitable
Hex
Heavy Hex
Hex
Heavy Hex
A307 Grade A & C
Any
1/4 to 1-1/2
A
-
B,D,DH
A,B,C,D,DH,DH3
A307 Grade A & C
Any
>1-1/2 to 2
-
A
A
C,D,DH,DH3
A307 Grade A & C
Any
>2 to 4
-
A
-
C,D,DH,DH3
A307 Grade B
Any
1/4 to 1-1/2
-
A
B,D,DH
B,C,D,DH,DH3
A307 Grade B
Any
>1-1/2 to 2
-
A
A
-
A307 Grade B
Any
>2 to 4
-
A
-
-
A325 Type 1
Plain
1/2 – 1-1/2
-
C
-
C3, D, DH, DH3
A325 Type 1
Galvanized
1/2 – 1-1/2
-
DH
-
-
A325 Type 3
Plain
1/2 – 1-1/2
-
C3
-
DH3
A354 Grade BC
Plain
1/4 to 1-1/2
-
C
-
C3, D, DH, DH3
A354 Grade BC
Plain
>1-1/2 to 4
-
C
-
C3, D, DH, DH3
A354 Grade BC
Galvanized
1/4 to 1-1/2
-
DH
-
-
A354 Grade BC
Galvanized
>1-1/2 to 4
-
DH
-
-
A354 Grade BD
Plain
1/4 to 1-1/2
-
DH
-
D, DH, DH3
A354 Grade BD
Plain
>1-1/2 to 4
-
DH
-
DH3
A449
Plain
1/4 to 1-1/2
B
-
D, DH
B,C,D,DH,DH3
A449
Plain
>1-1/2 to 3
-
A
-
C,C3,D,DH,DH3
A449
Galvanized
1/4 to 1-1/2
-
DH
D, DH
D
A449
Galvanized
>1-1/2 to 3
-
DH
-
D
A490 Type 1
Plain
1/2 – 1-1/2
-
DH
-
DH3
A490 Type 3
Plain
1/2 – 1-1/2
-
DH3
-
-
A687
Plain
5/8 – 3
-
DH
-
DH, DH3
A687
Galvanized
5/8 – 3
-
DH3
-
-
F1554 Grade 55
Plain
1/4 to 1-1/2
A
-
B,D,DH
A,B,C,D,DH,DH3
F1554 Grade 55
Plain
>1-1/2 to 4
-
A
-
C,D,DH,DH3
F1554 Grade 55
Galvanized
1/4 to 4
-
A
-
C,D,DH,DH3
F1554 Grade 105
Plain
1/4 to 1-1/2
D
-
-
DH, DH3
F1554 Grade 105
Plain
>1-1/2 to 3
-
DH
-
DH3
F1554 Grade 105
Galvanized
1/4 to 3
-
DH
-
DH3
Source: ASTM A563-07a Appendix X1

 

Industry Focus
  • Agricultural
  • Automotive
  • Construction
  • Electronics
  • Food Processing
  • Heavy Machinery
  • Marine
  • Mining
  • Nuclear
  • Oil, Gas, Petroleum
  • Energy
  • Medical
  • Transportation
Intended Application
  • Boilers
  • Bridges
  • Construction Machinery
  • Engineered Plumbing
  • Engines
  • Hydraulics
  • Impellers
  • Jewelry
  • Machine Tools
  • Water Treatment Plants
Materials (Metals)
  • Alloy Steels
  • Aluminum
  • Beryllium
  • Brass
  • Silicone Bronze
  • Carbon Steel
  • Magnesium
  • Molybdenum
  • Monel
  • Inconel
  • Nickel
  • Stainless Steel
  • Tin
  • Titanium
Materials (Plastic Polymers)
Various PlasticsNylon
Standard
BritishEnglishMetric
Hardening Specification
Heat Treated to any custom Specification
Fastener Types
*We can manufacture many custom fasteners to your specification*

  • Dowels & Pins
  • Hose Couplings
  • Nails
  • Rivets
  • Screws
  • Shackles
  • Shaft Couplings
  • Studs
Bolt Types
*We can manufacture many custom bolts to your specification*

  • Anchor
  • Bent
    • Eye
    • Hook
    • J
    • U
  • Elevator
  • Lag
  • T-Handle
  • T-Slot
  • Flange
  • Carriage
  • Bent
  • Plow
Bolt & Screw Head Types
*We can manufacture many custom head types to your specification*

  • Binding
  • Button
  • Fillister
  • Flat
  • Flat Undercut
  • Headless
  • Hexagon
  • Indented Hexagon
  • One-Way
  • Oval
  • Pan
  • Pentagon
  • Phillips
  • Round
  • Shoulder
  • Square Shoulder
  • Socket
  • Trimmed Hex
  • Truss
  • 12-Point
Thread Types
*We can manufacture many custom thread types to your specification*

  • ACME
  • Drywall
  • Machine
  • Self-Tapping
  • Self-Drilling Drive Screws
  • Self-Drilling
  • Type 17
  • Type 23
  • Type 25
  • Type A
  • Type AB
  • Type B
  • Type F
  • Wood
  • UNC
  • UNF
Grades
*We can manufacture to many custom grades meeting your specification*

  • 2
  • 5
  • 8
  • 8.8
  • 10.9
  • 12.9
Bolt & Screw Drive Types
*We can manufacture many custom drive types to your specification*

  • Combination
  • Hex/Hexagonal
  • Phillips
  • Six Lobe
  • Slotted
  • Socket
  • Square
  • Tamper Resistant
  • Torx
Nut Types
*We can manufacture many custom nut types to your specification*

  • 2-Way
  • Anchor
  • Cap
  • Castle
  • Conical
  • Coupling
  • Finished Hex
  • Flex Lock
  • Heavy Hex
  • Hex Flange
  • Hex Jam
  • Keps
  • Nylon Insert
  • Nylon Patch
  • Nylon Pellet
  • Semi-Finished Hex
  • Serrated Hex Flange
  • Slotted Hex
  • Square
  • Thumb
  • Top Lock
  • Wing
Finish
  • Automotive
  • Black Oxide
  • Brass Plated
  • Cadmium
  • Chromate
  • Chrome
  • Color Coated
  • Galvanized
  • Nickel Plated
  • Painted
  • Phosphate
  • Polished
  • PTFE
  • Silver Plated
  • Zinc Plated
 
Industry Standards
ANSI – American National Standards Institute

  • ANSI B 18.2.4 2M
  • ANSI B 28.2.4 1M

DIN

  • DIN 934
  • DIN 970
UTS – Unified Thread Standard

  • UNC
  • UNF
  • UNEF
  • UNS
  • NPT
  • NPTF

ISO – International Organization for Standardization

  • ISO 4032
  • ISO 4033
Production Volume
Min
Max

$60

Low Volume to High Volume

Several Million units

Diameter
Min
Max

M2

#4

M80

4 in

Metric Nuts Packaging

Metric Nuts PackagingPackaging:

In generally, If you have no special requirement, we will use the mass packing (bag carbon tray). If you want to do these special packing, please advise us the specific details, pictures or design.

Shipping:In generally, our customer often request to delivery by express, plane or sea. Any other better way will be also accepted well.

Steel Nut Inventory

We export

Ferralium 255 Metric Nuts, Super Duplex S32760 Metric Nuts, Duplex 2507 Metric Nuts, Ferralium 255 FG46 Metric Nuts, Duplex S31803 Metric Nuts, AL 6XN Stainless Steel Metric Nuts, 15 5PH Stainless Steel Metric Nuts, 17 4 PH Stainless Steel Metric Nuts, Alloy 20 Stainless Steel Metric Nuts, 254 SMO Stainless Steel Metric Nuts, 904L Stainless Steel Metric Nuts, 330 Stainless Steel Metric Nuts, Nimonic 263 Metric Nuts, Nimonic 90 Metric Nuts, Nimonic 80A Metric Nuts, Nimonic 75 Metric Nuts, Nimonic 60 Metric Nuts, Nimonic 65 Metric Nuts, 348H Stainless Steel Metric Nuts, 348 Stainless Steel Metric Nuts, 410 Stainless Steel Metric Nuts, 416 Stainless Steel Metric Nuts, 420 Stainless Steel Metric Nuts, 429 Stainless Steel Metric Nuts, 430 Stainless Steel Metric Nuts, 304 Stainless Steel Metric Nuts, 304H Stainless Steel Metric Nuts, 304L Stainless Steel Metric Nuts, 304N Stainless Steel Metric Nuts, 304LN Stainless Steel Metric Nuts, 309 Stainless Steel Metric Nuts, 310 Stainless Steel Metric Nuts, 310H Stainless Steel Metric Nuts, 310MoLN Stainless Steel Metric Nuts, 316 Stainless Steel Metric Nuts, 316L Stainless Steel Metric Nuts, 316H Stainless Steel Metric Nuts, 316LH Stainless Steel Metric Nuts, 316N Stainless Steel Metric Nuts, 317 Stainless Steel Metric Nuts, 317L Stainless Steel Metric Nuts, 321 Stainless Steel Metric Nuts, 321H Stainless Steel Metric Nuts, 347 Stainless Steel Metric Nuts, 347H Stainless Steel Metric Nuts

For a standard or special fastener, we are at your service! We specialize in corrosion-resistant components, those made from stainless steel and non-ferrous alloys. Look to TorqBolt for fine products and reliable information. Contact us today to learn more about our corrosion-resistant fasteners.

Phone:  00-91-22-66157017, Email: order@torqbolt.com